Axis T8504-E User Manual page 6

AXIS T8504–E Outdoor PoE Switch
General information
HTTP is a web-based friendly configuration interface.
HTTPS-TLS is a secured web-based friendly configuration interface.
• SNMP via an SNMP manager application – to monitor the unit over the network (MIB-II RFC1213) and to monitor or
configure the unit PoE capabilities (RFC3621)
SNMPv2c for non-secured SNMP management
SNMPv3 for secured and encrypted management
RFC1213 MIB-II for network statistics
RFC3621 for PoE SNMP MIBs
Private MIB extension for RFC3621 PoE MIB
Various infrastructure and network MIBs such as IP-MIB, TCP-MIB, UDP-MIB etc.
• SSH via an SSH client – to view the unit PoE power report, network status, unit configuration and production information;
to update software, enable or disable PoE functionality and to ping remote network devices for connectivity tests
Remote user authentication
User access can be managed in the following ways:
• Local – Username and password is managed locally by the device
• RADIUS – Username and password is authenticated by RADIUS server over the network
• TACACS+ – Username and password is authenticated by TACACS+ server over the network
Security
Web HTTP and HTTPS, SNMPv2, SNMPv3 and SSH, used for accessing the unit, offer different levels of security strength. Also RADIUS
and TACACS+, used for remote user authentication, offer different security levels.
SNMPv1 and SNMPv2 use community string for Get/Set/Trap authentication. SNMPv1 and SNMPv2 are considered as unsecured
protocol since the community string password can easily be intercepted by any network sniffing device.
SNMPv3 resolves SNMPv1/v2 security issues by adding authentication and encryption layer on top of SNMP packets.
Default unit IP, username and password
The unit is shipped with the following factory default usernames and passwords:
Unit default IPv4 address
IP = 192.168.0.254
Mask = 255.255.255.0
Web HTTP/HTTPS and SSH
Username = root
Password = pass
SNMPv2
GET community string = public
SET community string = write
Read community = public
Write community = write
Trap community = public
SNMPv3
Username = admin
6