Installation; Typical Ventimatic™ Shutter Installation - Daikin ARQ Installation And Maintenance Manual

Pre-Installation Considerations – Typical Floor Unit Installation
Figure 5: Typical unit ventilator installation and louver details (see installation section for warnings and cautions)
Internal Column For
Wall Bracing (By Others)
Lintel (by others)
Weep Holes
Typical VentiMatic™ Shutter Installation
Figure 6: Typical VentiMatic Shutter assembly installation (see installation section for typical warnings and cautions)
Louver
IM 1083-3
Screws or Bolts (by others)
Caulk Top And
Two Sides Of Louver
Sealed Mortar Bed
VentiMatic Shutter Assembly
Outside
Roomside
Refrigerant Pipe Tunnel
Unit Gasket
Unit Gasket
Caulk Bird Screen
Weep
Holes
Building Wall
Outside
Typical VentiMatic louver installation with shelving.
8
1" End Panel w/Cut Out
Unit Insulating Blanket
Back Of Unit
Unit Outside Air Opening
Unit Bottom Gasket
Seal Under Unit
Floor
Roomside
www.DaikinApplied.com