Installation/Configuration; Removal Of The Load Cell Shipping/Restraining Bolt; Hd-100, -400 And -500 Series; Figure 3-1 Hd 100-500 Series Shipping/Restraining Bolt Location - Magtrol HD-106 User Manual

3. Installation/Configuration

3.1

REMOVAL OF THE LOAD CELL SHIPPING/RESTRAINING BOLT

Within the dynamometer enclosure there is a load cell shipping/restraining bolt that must be removed
before dynamometer operation. The bolts are identified with red heads. Refer to the diagrams below
for the bolt location on your model.
Note:
3.1.1 HD-100, -400
The shipping/restraining bolt is located on the bottom of the HD 100-500 Series Hysteresis
Dynamometers as shown in Figure 3–1.
Retain the shipping/restraining bolt for future use when moving or
shipping your Magtrol Dynamometer.
-500 S
anD erieS
SHIPPING
BOLT
Figure 3–1 HD 100–500 Series Shipping/Restraining Bolt Location
28