Enable Standby; About Standby - Cisco TelePresence SX10 User Manual
Ce9.5
Hide thumbs
Also See for TelePresence SX10:
- Administrator's manual (216 pages) ,
- Reference manual (188 pages) ,
- User manual (38 pages)
Table of Contents
Advertisement
Video Calls
Enable Standby
1
Starting from Home screen, use the Cursor keys on the remote
control to select the More icon (>) in the upper left corner of
the screen.
3
Use the Cursor keys to navigate down to Standby.
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
Press OK on the remote control.
4
Press the OK key on the remote control to exit the menu, putting
changes into effect.
About Standby
Your system can be set to Standby
to save power. You will still be able
to receive calls as usual.
19
Advertisement
Table of Contents
