Table of Contents
Advertisement
Video Calls
Enable Standby
1
Starting from Home screen, use the Cursor keys on the remote
control to select the More icon (>) in the upper left corner of
the screen.
3
Use the Cursor keys to navigate down to Standby.
D15097.22 Cisco TelePresence SX10, SX20 User Guide APRIL 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Press OK on the remote control.
4
Press the OK key on the remote control to exit the menu, putting
changes into effect.
About Standby
Your device can be set to Standby
to save power. You can still receive
calls as usual.
19
Advertisement
Table of Contents
