Enable Standby - Cisco SX10 User Manual

16
Availability

Enable Standby

Starting from Home screen, use the Cursor keys on the
remote control to select the Settings field in the upper
left corner of the screen.
Use the Down Cursor button twice on the remote
control to select Standby. If your system has Intelligent
Proximity enabled you will need to press the Down
Cursor button three times.
Press OK on the remote control.
Press the OK key on the remote control to exit the menu,
putting changes into effect.
About Standby
Your system can be set to Standby
to save power. You will still be able
to receive calls as usual.
D1509707 User Guide
Cisco TelePresence TRC 6
Produced: April 2016 for CE 8. 1
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.