View Camera Settings (Local Camera); About Camera Settings - Cisco TelePresence SX10 User Manual

Camera Control

View Camera Settings (Local camera)

1
In a call or outside a call (as shown here), move cursor up to
the upper right corner to the Camera icon. Press OK on the
remote control.
3
You may now make the adjust the pan, zoom and tilt of the
camera. Use the Increase/Decrease controls of the remote
control to adjust the zoom and the Cursor keys to adjust pan
and tilt.
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
The camera icon will now appear. Press OK again on the remote
control.
4
You may also make the self-view image sticky (always shown) and/
or maximize it by selecting the icons in the upper right corner of this
menu.
Press Back on the remote control to exit the menu.

About Camera Settings

The camera settings let you control
the zoom, pan and tilt of your own
camera.
The self-view (the image that the
others see from your system) can
be turned on and off as well as be
shown minimized or maximized (full
screen).
You may want the self-view to be
always shown, this is called to make
it sticky.
32