Enable Standby - Cisco TelePresenceSX10 User Manual

15 Availability

Enable Standby

Starting from Home screen, use
the Cursor keys to select the
field in the upper left corner of
the screen.
Press the OK key to exit the
menu, putting changes into
effect.
Press the OK key. Use the Cursor buttons to select
Standby.
About Standby
Your system can be set to Standby
to save electrical energy. You will still
be able to receive calls as usual.
D1509704 User Guide
Cisco TelePresence SX10
Produced: December 2014 for TC7.3
All contents © 2014
Cisco Systems, Inc. All rights reserved.