Start And Stop Presentation; About Content Sharing - Cisco TelePresence SX10 User Manual

Content Sharing

Start and Stop Presentation

1
Make sure your presentation source is connected and On. You
may need to select Share and press OK on the remote control.
3
The size of the shared image is controlled by means of the
Minimize/Maximize icon. Select this and press OK on the
remote control, if needed.
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
Share in call
You may now select Local preview to inspect the contents
without sharing it with the others, before you select Share in
call to share it with the others.
4
Stop sharing
To stop sharing content, select Stop sharing and press OK on the
remote control.

About Content Sharing

Use this feature to share content
on your PC in a call or outside a
call. The procedure is the same, but
shown here is the in-call way only.
To share content using Proximity,
make sure your presentation source
has Cisco Proximity installed and
activated. Allow some time for the
pairing to take place. Follow on-
screen instructions.
24