Enable Do Not Disturb - Cisco Telepresence SX10 User Manual

12 Availability

Enable Do Not Disturb

Starting from Home screen, use
the Cursor keys to select the
field in the upper left corner of
the screen.
Press the OK key to exit the
menu, putting changes into
effect.
Press the OK key. Use the Cursor buttons to select
Available or Do Not Disturb.
About Do Not Disturb
Your system can be set to not
respond to incoming calls. You may,
however, use it to call others as
much as you want.
D1509703 User Guide Cisco TelePresence SX10
Produced: July 2014 for TC7.2
All contents © 2014
Cisco Systems, Inc. All rights reserved.