MAGINON IPC-1A Instruction Manual page 44

Path: Enter a path for storing the images on the FTP server.
Transmission mode: Select whether a passive or active FTP connection is to be requested
for the transmission.
Upload in intervals: Select this option if you wish images of the WiFi Network Camera to
be
transmitted to the FTP server at regular intervals.
Use time schedule: You can restrict the
time window during which images are to be
transmitted to a FTP server. As soon as you
select this option, the time schedule
shown on the right appears in which you
can select the active times. Select the
times during which the FTP settings are to
be active.
Interval (seconds): Determine at what
intervals an image is to be recorded and
transmitted. The values are in seconds.
Specify file name: Select this option if you wish to specify a file name. If this option is not
selected, a default file name is used for saving images.
File name: Enter a file name. A sequential number is added to the entered name during
saving of the images.
Specify maximum number: This option can be activated to limit the number of files
stored on the FTP server.
Number of files: Enter the maximum number of files that should be stored on the FTP
server. Once this number has been reached the oldest image file is always deleted when a
new image is saved.
To test entries for the FTP settings, click on the "Test" symbol in the below menu bar.
A single image is then transferred to the FTP server.
Click on "Save" to accept changes to the settings. Changes are accepted without the WiFi
Network Camera having to be restarted.
42