MAGINON IPC-1A Instruction Manual page 42

Server: Enter the address of the SMTP server of the email account.
Port: Enter the port of the SMTP server. The standard value is 25.
Encryption: State whether and what encryption the SMTP server is using.
Required authentication: State whether the SMTP server requires authentication. If so,
select this option and then enter the user name and password of the email account.
Sender: Enter the email address through which the alarm messages are to be sent out.
Recipients 1-4: Enter up to 4 email addresses to which the alarm messages are to be sent.
If you wish to be notified to your email address through which the alarm message is sent
out, this address must also be entered as a recipient.
Send out IP address: Use this option to determine whether an email is to be sent to the
specified email addresses with the current public IP address of the WiFi Network Camera
as
soon as the IP address of the WiFi Network Camera changes.
Information has to be entered in the fields "Server", "Port", "Sender" and "Recipient 1".
Click on "Test" to test the mail settings. A test email is then sent to the specified email
addresses.
Click on "Save" to accept changes to the settings. Changes are accepted without the
WiFi Network Camera having to be restarted.
40