Table of Contents
Advertisement
The center Calibrate button, serves to realign the camera head. Click on the button once and
leave the mouse button on the button until the camera head no longer moves. A calibration
should be carried out if the camera head has been moved manually, causing the stored
positions to no longer work. As soon as the WiFi Network Camera is connected to power, a
calibration is automatically carried out.
Pressing the buttons Horizontal patrolling or Vertical patrolling starts an automatic pivoting
of the camera in horizontal or vertical direction. The movement can be stopped by clicking
on the respective buttons
Further information about the speed of movement of the camera head can be found in
section 7.12.
The control buttons can also be used to switch the digital input on or off.
6.2.2. Storing positions
The option "Positions" offers the facility to store up to 3 fixed positions of the camera head,
which can then be called up at a later stage.
Click on button
of option 1, 2 or 3 to store the current camera position under this
number. This deletes the position previously stored under the respective number.
Click on button
of option 1, 2 or 3 to move the camera head in the position stored under
the respective number.
26
.
Hide quick links:
Advertisement
Table of Contents
