MAGINON IPC-1A Instruction Manual page 18

The WiFi Network Camera is automatically set up in the network if the option "Use DHCP" has
been activated and the used router also supports DHCP and the function has been activated.
If under address an address other than 0.0.0.0 appears, the automatic network set up of the
WiFi Network Camera was successful.
To change the internal port used by the WiFi Network Camera, simply specify the new port
number. In case of a port forwarding (see section 5.8, Internet access) the external and internal
port of the WiFi Network Camera should be directly selected.
You can, however, also specify the network data manually, for instance, if automatic
configuration is not working. In this case, first deactivate "Use DHCP". This releases the input
fields for static configuration.
Under Static configuration enter the network data for the WiFi Network Camera. This data is
generally obtained via the network settings of the computer or of the router. Further
information about network settings can also be found in section 7.5 "Network settings".
Click on "Apply" to accept the changed settings. You are then asked to enter the user name
and password of the administrator. The camera is supplied without a password for the user
account "admin".
In order to call up a WiFi Network Camera selected in the camera list of supra IPCam Config in
the Browser program, click on "Browser" in the menu. The standard Browser then opens with
the log in page of the camera (see section 6). You can then either view the camera image or
enter further settings for the camera.
Click on "Instructions" to open the Instruction Manual on screen, if it has already been
installed from the software CD.
To obtain information about the selected WiFi Network Camera and the software, select the
menu option "Version".
16