Date And Time - MAGINON IPC-1A Instruction Manual

7.3. Date and time

In this option enter the time zone in which the WiFi Network Camera is located and whether
the date and time should be automatically updated by a so called NTP server (time server).
The correct time is, for instance, required for planning the time for alarms or FTP transfers.
Current date and time: This option shows the date and time as stored in the surveillance
camera. When saving the settings, this data is synchronised with the local system. If the
function "Synchronise with NTP server" is not selected, the date and time can be set with
this option.
Time zone: Select the time zone in which the WiFi Network Camera is located.
Synchronise with NTP server: Select this option if date and time should be automatically
updated via a NTP server.
NTP server: Select the NTP server through which date and time is to be updated from the
provided list. You can also enter names or IP addresses of NTP servers not listed.
Click on "Save" to accept changes to the settings. Settings are automatically retained without
restarting the WiFi Network Camera.
30