Table of Contents
Advertisement
®
FlexProbe
- Flexible AC Current Probe
MECHANICAL SPECIFICATIONS
Module Output:
Two 4mm safety banana jacks
Battery: Two 3V lithium batteries (CR2032)
Battery Life: From 3.2V to 2.8V, 720 hrs typical (continuous use)
Low Battery: Red LED blinks when battery voltage is low
Dimensions (sensor): 24" nominal (± 1")
Dimensions (Electronic Module): 1.95 x 2.7 x 0.8" (50 x 69 x 20mm)
Connection Cable Length:
Colors: Red sensor with dark gray connector, black module and
connection cable (sensor to module)
Drop Test: Per IEC 68-2-32
Weatherproofing:
MATERIAL SPECIFICATIONS
Module: UL 94V0, Color black, ABS plastic
Sensor Latch: Material: Lexan 500R, UL94V0
Cable Assembly to Sensor: UL 94V0, 1000V rating
SAFETY SPECIFICATIONS
Electrical:
Double insulation or reinforced insulation between primary or secondary
and outer case per IEC 1010-2-32
• 1000V, Category III, Pollution Degree 2
• 600V Common Mode
• 7.50kV, 50/60Hz, dielectric between sensor and the output
*Reference Conditions: 25°C ± 5°K, 20 to 75% RH, 1 minute warm-up, battery at 3V ± 0.2V, conductor
center, external DC magnetic field < 40 A/m, no external AC magnetic field, no external electrical field,
10 to 100 Hz, sine wave. See accuracy curves for low currents.
Module to Sensor: 6.5 ft
Module to Banana: 5 ft
Module: IP40 (EN 60529) - NEMA 2
Sensor: IP 65 (EN60529) - NEMA 4X
- 8 -
Advertisement
Table of Contents
