Canon iPF671 Service Manual page 295

Print item
JAM 01-05
01
02
03
04
05
06
07
08
09
10
11
12
INK CHK (The ink color is
indicated)
Print content
JAM log (5 records)
Jam type
Media format
Jam timing
Width detection OFF mode
Head height
Cut mode
Media passing environment
Borderless/Bordered
Print mode label No.
Media size
Media type
Refill log
Print whether disable remaining ink detection was
previously set
Printed value
Number: Lowest is the most recent
Date: mm/dd
Time: mm/ss
Jam code
1: CR error
2: Jam
3: Feed failure (delay)
4: Cut failure
*: Unknown
1: Roll media
2: Cut sheet
*: Unknown
1: Feed
2: Print
3: Eject
*: Unknown
1: ON
2: OFF
*: Unknown
0: SL (1.0mm)
1: L (1.3mm)
2: M1 (1.8mm)
3: M2 (2.0mm)
4: M3 (2.2mm)
5: H (2.6mm)
*: Unknown
1: Fully close
2: Only HP side open
3: 1/4 open
4: 1/2 open
5: 3/4 open
6: Fully open
*: Unknown
1: User cut
2: Eject cut
3: Auto cut
*: Unknown
0: A(temperature 15 to 25 degrees centigrade/humidity
40 to 60%)
1: B(temperature 25 to 30 degrees centigrade/humidity
40 to 60%)
2: C(temperature 15 to 30 degrees centigrade/humidity
10 to 40%)
3: D(temperature 15 to 30 degrees centigrade/humidity
60 to 80%)
4: E(temperature 15 to 30 degrees centigrade/humidity 0
to 10%, or 15 degrees centigrade or less and 30 degrees
centigrade or more/humidity 0 to 50%[low humidity is
out of guarantee.])
5: F(temperature 15 to 30 degrees centigrade/humidity
80 to 100%, or 15 degrees centigrade or less and 30
degrees centigrade or more/humidity 50 to 100%[high
humidity is out of guarantee.])
*: Unknown
1: Bordered printing
2: Borderless printing
*: Unknown
Display print mode
*: Unknown
Display size
*: Unknown
Display media name
*: Unknown
0: Disable remaining ink detection was never set
1: Disable remaining ink detection was set at least once
Chapter 7
7-39