Cisco Nexus 9000 Series Configuration Manual page 50

Configuration Examples for ITD
dg1
Pool
------------------------------ ------------ ------ ---------
test_itd_pool
ACL Name
------------------------------
acl1
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
1
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_1
Node IP
------------------- ------- --- ---- ----- --------------- -- --- -------
2
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_2
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
3
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_3
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
4
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_4
switch(config)# show itd test
Legend:
ST(Status): ST-Standby,LF-Link Failed,PF-Probe Failed,PD-Peer Down,IA-Inactive
Name
-------------- ---------- -------- -------
test
Exclude ACL
-------------------------------
Device Group
-------------------------------------------------- ----- ------
dg1
Pool
------------------------------ ------------ ------ ---------
test_itd_pool
ACL Name
------------------------------
Cisco Nexus 9000 Series NX-OS Intelligent Traffic Director Configuration Guide, Release 9.x
42
Interface
Eth1/11
IP Cfg-S WGT Probe Port
1.1.1.1 Active
Cfg-S WGT Probe Port
2.1.1.1 Active
IP Cfg-S WGT Probe Port
3.1.1.1 Active
IP Cfg-S WGT Probe Port
4.1.1.1 Active
LB Scheme Status
dst-ip ACTIVE
Interface
Eth1/11
ICMP
Status Track_id
UP 2
Probe-IP
1 ICMP
Probe-IP
1 ICMP
Probe-IP
1 ICMP
Probe-IP
1 ICMP
Buckets
4
Probe
ICMP
Status Track_id
UP 2
Configuring ITD
STS Trk# Sla_id
OK 3 10003
STS Trk# Sla_id
OK 4 10004
STS Trk# Sla_id
OK 5 10005
STS Trk# Sla_id
OK 6 10006
Port