Cisco Nexus 9000 Series Configuration Manual page 46

Configuration Examples for ITD
-------------------------------------------------- ----- ------
dg1
Pool
------------------------------ ------------ ------ ---------
test_itd_pool
ACL Name
------------------------------
acl1
Node IP
------------------- ------- --- ---- ----- --------------- -- --- -------
1
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_1
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
2
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_2
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
3
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_3
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
4
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_4
switch(config-itd)# sh run service
!Command: show running-config services
!Time: Tue Sep 20 20:39:55 2016
version 7.0(3)I5(1)
feature itd
itd device-group dg1
probe icmp
node ip 1.1.1.1
node ip 2.1.1.1
node ip 3.1.1.1
node ip 4.1.1.1
itd test
device-group dg1
ingress interface Eth1/11
load-balance method dst ip
access-list acl1
no shut
Cisco Nexus 9000 Series NX-OS Intelligent Traffic Director Configuration Guide, Release 9.x
38
Interface
Eth1/11
Cfg-S WGT Probe Port
1.1.1.1 Active
IP Cfg-S WGT Probe Port
2.1.1.1 Active
IP Cfg-S WGT Probe Port
3.1.1.1 Active
IP Cfg-S WGT Probe Port
4.1.1.1 Active
ICMP
Status Track_id
UP 2
Probe-IP
1 ICMP
Probe-IP
1 ICMP
Probe-IP
1 ICMP
Probe-IP
1 ICMP
Configuring ITD
STS Trk# Sla_id
OK 3 10003
STS Trk# Sla_id
OK 4 10004
STS Trk# Sla_id
OK 5 10005
STS Trk# Sla_id
OK 6 10006