Cisco Nexus 9000 Series Configuration Manual page 34

Verifying the ITD Configuration
Command
show itd [itd-name] [brief | vrf [vrf-name]]
show itd {all | itd-name} [dst ip-address | src
ip-address] statistics [brief]
show itd session device-group [name]
show running-config services
These examples show how to verify the ITD configuration:
switch# show itd
Name
-------------- ----- ---------- -------- -------
WEB
Device Group
-------------------------------------------------- -------------
WEB-SERVERS
Pool
------------------------------ ------------ ------ ---------
WEB_itd_pool
Virtual IP
---------------------------------------- ---------- -----
10.10.10.100 / 255.255.255.255
Node
------------------------- ------------ ------ ---------- ---------
1
Cisco Nexus 9000 Series NX-OS Intelligent Traffic Director Configuration Guide, Release 9.x
26
Probe LB Scheme
ICMP src-ip
Interface
Po-1
Netmask/Prefix
IP Config-State Weight Status
10.10.10.11 Active
Purpose
Displays the status and configuration for specified
ITD instances.
• Use the itd-name argument to display the status
and configuration for a specific ITD instance.
• Use the brief keyword to display summary status
and configuration information.
• Use the vrf keyword to display the VRFs for the
specified ITD instance.
Displays the statistics for all or specified ITD
instances.
• Use the itd-name argument to display statistics
for a specific ITD instance.
• Use the brief keyword to display summary
information.
Before you can use this command to view
Note
ITD statistics, you must enable ITD
statistics by using the itd statistics
itd-name command.
Displays all of the configured ITD sessions or the ITD
session for the specified device group.
Displays the configured ITD device group and
services.
Status Buckets
ACTIVE 2
VRF-Name
Status Track_id
UP -
Protocol Port
IP 0
1 OK
Configuring ITD
Track_id
-