FLIR X8400sc User Manual page 46

7.2.1.3 Configuration of the network interface
Procedure
Open the Network connections configuration page : Control Panel\Network and
Internet\Network Connections
1
Right Click > Properties and select Internet Protocol V4. Click on Properties
2
Set the IP address to 169.254.242.10 with a subnet mask at 255.255.255.0
3
Click OK
The camera can now be accessed:
4
User Manual X8400 sc
•
With the Windows Explorer to get access to the camera files such as CNUC,
lens or filter ID descriptors.
•
With Res.NET to get access to the camera registry. ResNet is an internal tool.
Contact your FLIR service department for more information.
46