FLIR X8400sc User Manual page 13

The temperature range of the camera can be automatically adjusted using the autoexposure
button on the touchscreen. Please refer to §6.2.2 for more information on autoexposure.
If the thermal scene does not match the configuration measurement (spectral filter on filter
wheel), it is required to select the correct configuration measurement in ResearchIR Max.
Please refer to §4.4.4)
1
2
3
1
2
3
4.3.1.1 Detaching the touchscreen LCD
The LCD screen can be detached from the camera and used remotely when the camera is
mounted on hard to reach position.
•
Note
•
Procedure Follow the procedure to install and detach the LCD screen from the camera
Unscrew the LCD screw using a flat screwdriver or a simple coin
1
2 Gently lift up the screen to disconnect it from the camera
Set in place the protective cap provided with the camera to avoid dust or water to
3
enter in the camera
User Manual X8400 sc
Figure 3 : LCD Touchscreen Description
Image Statistics
Camera configuration
information
Synchronisation
information
The camera can still be operated without any LCD screen connected.
The screen can be detached and attached while the camera is in operation
4
5 6
Start Acquisition in
4
ResearchIR Max
5 Auto-exposure
6 Change Color palette
13