Table of Contents
Advertisement
4 INSTALLING THE X8400sc ON THE EXPERIMENT
4.1 Mounting the camera
The camera can be operated installed either on a workbench or mounted on a tripod or
custom mount. Standard photo mount interface (1/4" UNC-20 or 3xM5 on camera bottom as
well as 3xM5 on left side of the camera) are available.
4.2 Powering the camera
4.2.1 Power supply
The camera is powered through the red power connector (#6 on Figure 1: Camera back
panel description) on the back panel. Connect the 24VDC power supply provided with the
camera (PN X1159).
The power button (#1 on Figure 1: Camera back panel description) now blinks slowly,
indicating power is received at the camera level.
Please refer to chapter 9.5 for power supply technical data.
4.2.2 Power button
The power button (#1 on Figure 2: Camera back panel description) is located behind the
touchscreen LCD. Open the touchscreen LCD to its maximal extension to access the button.
Note
Keep the LCD screen opened or detach it when the camera is under operation not to block
the external cooling exhaust
User Manual X8400 sc
2
1
2
1
¼ UNC – 20
2
Camera base plate M5 threads
3
Camera left side M5 threads
2
11
Advertisement
Table of Contents
