Table of Contents
Advertisement
G0622—4" x 6" Metal-Cutting Bandsaw
This metal-cutting bandsaw is perfect for the
small shop. It features a maximum cutting capac-
ity of 4
⁄
" round and 4
1
2
cutting speeds, automatic shut-off, and a vertical
cutting attachment.
Figure 40. G0622 4" x 6" Metal-Cutting
Bandsaw.
G0783—11" Slow-Speed Cold Cut Saw
This machine's 2.7 HP, 220V, 3-phase motor
and gear drive produce a blade speed of either
114 RPM or 57 RPM. It features a dual-vise sys-
tem that clamps on each side of the blade and a
coolant system prevents the blade from overheat-
ing. A perfect choice for clean, precise, spark-free
metal cutting!
Figure 41. G0783 11" Slow-Speed Cold Cut
Saw.
-32-
⁄
" x 6" rectangular, three
1
2
Phase Converters
G5843— Static Phase Converter
Capacities:
• Operates
3-phase
continuous horsepower or 90% intermit-
tent-duty
• For 3–7 HP motors
G5844—Rotary Phase Converter
Features:
• Operates 3-phase motors at at 100%
power and 95% efficiency
• For 5 HP motors
• "Stackable" for higher HP requirements
H5843
Figure 42. H5843 and H5844 Phase Converters.
Model G0767Z (Mfd. Since 11/17)
motors
at
70%
H5844
Advertisement
Table of Contents
