Transporting The Mower; Maintenance - Progressive Turf Equipment Pro-Flex 120 Operators Manual And Parts Lists

TRANSPORTING THE MOWER

When transporting the Pro-Flex 120 from site to site, ensure the wings and decks
are in the raised position and wing and deck safety locks are engaged.

MAINTENANCE

Service
Spindle Bearings (if equipped with
greaseable spindles)
(5 locations)
Intermediate Hanger Bearing
Deck Pivots
Deck Wheels
Transport Wheels
Hitch Swivel
Wing Pivots
Input PTO Shaft (7 locations)
Int. PTO Shaft (2 locations)
Inspect Gearbox
Check Gearbox Oil
Change Gearbox Oil
The Pro-Flex 120 mower is NOT designed for use on public
roadways. Use an appropriate transportation method such
as a trailer or float to move mower from site to site if
required.
Use an appropriate sized vehicle to tow the Pro-Flex 120
mower. Do not tow with vehicles that are less than 1035lb,
vehicle handling and braking characteristics will be
diminished.
Ensure the tractor controls are in the park position, the engine is
turned off, the parking brake is engaged and hydraulic pressure
has been relieved before performing service or maintenance.
Always use personal protection devices such as protective
glasses and face shields, protective shoes, gloves, hard hats, and
ear protection when performing service or maintenance
functions.
When completing a maintenance or service function, make sure
all safety shields are installed before placing mower in service
Initial Run
- 50h
X
-
-
-
-
-
-
-
-
-
-
X
27
Maintenance Intervals
Daily As Req'd
Monthly
X -
X -
- X
- X
- X
- X
- X
- -
- -
X -
- -
- -
.
100h / 600h /
Yearly
- -
- -
- -
- -
- -
- -
- -
X -
X -
- -
X -
- X