Adjusting The Mower For Cutting; Setting The Cutting Height - Progressive Turf Equipment Pro-Flex 120 Operators Manual And Parts Lists

ADJUSTING THE MOWER FOR CUTTING

SETTING THE CUTTING HEIGHT

Each of the five independent mower decks has its own cutting height adjustment.
Cutting height is set by adjusting the height of the mower deck wheel arms. Each
deck has one fixed wheel arm and one pivoting wheel arm; ensuring that all four
tires remain in contact with the turf while navigating contoured areas for a more
uniform cut.
NOTE: For optimal cutting results, the mower should be set to remove not more
than 1/3 of the total grass height. This will result in the best cutting
performance while minimizing stress to the grass.
The deck wheel arms are bolted solid to the deck frame in order to provide rigid,
positive cutting height control.
Follow these steps to adjust the cutting height anywhere from 3/4" to 3":
1) Place the mower deck safety latch into the
locking position on each deck.
2) Raise the mower decks into the Pro Lift-N-
TM
Turn raised position.
3) Turn the engine off on the tractor, place all
controls in neutral position and set the
parking brake.
4) Using the cutting height decal, determine the
hole you wish to set the axles in according to
the desired cutting height.
5) On the fixed wheel arm side,
remove the two mounting bolts
and reposition the axle in the
desired holes. Be sure to retighten
properly.
22