GENERAL SAFETY PRECAUTIONS
The operator of this machine must have sufficient knowledge and instructions in
the care and operation of this mower and the power unit being used before he /
she uses the machine. Do not allow unauthorized persons or children to operate
the machine. Do not allow riders on the machine.
It is the obligation of the operator to make sure that all guards and shields are in
place on the machine. Safety decals must be in place and be readable – accidents
may otherwise occur. Contact your dealer or the manufacturer for replacement
manuals or decals.
Never use a machine that does not have an operator's manual available. Learn and
understand the safety signs and symbols on the machine and the operator
instructions before you begin to use the machine.
Wear personal protective equipment. Know and use the
protective equipment that is to be worn when operating or
servicing the machine. Hard hats, protective glasses and
face shields, protective shoes, gloves, reflector type vests,
and ear protection are types of equipment that may be
required. Prolonged exposure to loud noise can cause
hearing damage.
Never operate a mower while under the influence of drugs or alcohol. These make
reflexes slow and put you and others in grave danger. Always make sure you have
full concentration while mowing.
Adhere strictly to all regulations at the worksite pertaining to the operation of this
equipment.
Always disengage power takeoff (PTO) when transporting or traveling between
work sites.
Be prepared for emergencies.
emergency contact information available at the work site.
POWER UNIT SAFETY
The operator must have sufficient knowledge in the care and operation of the
power unit (tractor) before connecting power unit to mower.
understand power unit operator's manual before connecting mower.
Power unit must be equipped with ROPS and seat belt. Foldable ROPS must be
secured in the upright position.
manufacturer. Seat belt must be worn at all times.
Power unit must be equipped with a 1-3/8" 6 spline 540 RPM PTO connection.
Never use PTO adapters to connect implements. Never connect mower driveline
to 1000 RPM PTO.
Hydraulic circuits to control mower functions must be set to 2000psi maximum
working pressure.
Have a first aid kit, fire extinguisher and
Follow recommendations of power unit
9
Read and