Data And Status Message Display; Data Display; Status Codes - Fronius 250/30 DCD DF Operating Instructions Manual

Data and status message display

Data display

The latest Fronius String Control 250/30 DCD DF data can be found at:
Anlagen / [Name of the system] / Aktuell / String Control

Status codes

Status codes generated by the Fronius String Control 250/30 DCD DF are sent to the Da-
talogger. The Datalogger responds in the same way as for a status code generated by the
inverter. Status codes can also be sent by SMS, fax or e-mail. You will find further informa-
tion in the 'Fronius DATCOM Details' operating instructions.
The Fronius String Control 250/30 DCD DF service codes are State 901 to 905. These
service codes indicate an excessive deviation in measuring channels 1 to 5.
We recommend that you activate the output comparison in the "Settings - General" menu.
This provides you with a list of service codes each time data is downloaded from the Da-
talogger to the PC. This list provides a brief overview of all the messages from the inverter
and the Fronius String Control 250/30 DCD DF.
81