Table of Contents
Advertisement
3 Handling
3.1
Assembly information
3.1.1
Mounting conditions
Suitable walls
Construction height
Installation depth
WC ceramic
Actuation
Viega Steptec WC module with empty pipe for shower WC (AquaClean)
For this, observe the Steptec system instructions for use.
With the construction height, the marked height of the upper edge of
the finished floor must be observed.
The installation depth is at least 145 mm.
The WC module is suitable for a shower WC (AquaClean).
The WC module can be extended by a remote actuation
Visign for Public1 (model 8326.21) or by an electronic actuation (model
8350.31 or 8350.32). The corresponding actuation method must be pre-
pared before the WC module is clad and tiled.
The corresponding empty pipe (included in the scope of delivery of the
remote actuation) is required when preparing the remote actuation
Visign for Public1.
Handling
10 from 21
Advertisement
Table of Contents
