Intel H2312JFJR Service Manual page 15

Server System Features
Feature
Memory
Chipset on each Compute
Node
Compute Node
External I/O connections
Compute Node Internal
I/O connectors/headers
Available I/O Module
Options
(Sold Separately)
System Fans by each
Compute Node
Compute Node Riser
Cards
Node Video
Node On-board storage
controllers and options
2
 Unbuffered DDR3 and registered DDR3 DIMMs.
 Memory DDR3 data transfer rates of 800, 1066, 1333 MT/s and 1600 MT/s.
 DDR3 standard I/O voltage of 1.5V (all speed) and DDR3 Low Voltage of 1.35V (1333MT/s or
below).
®
Intel C600-A chipset with support for optional Storage Upgrade Keys.
 DB-15 Video connectors.
 Two RJ-45 Network Interface for 10/100/1000 LAN.
 One stacked two port USB 2.0 (Port 0/1) connectors.
 One dedicated 1GbE management port on rIOM carrier (Optional).
 One InfiniBand* QDR QSFP port (Board SKU: S2600JFQ) or
 One InfiniBand* FDR QSFP port (Board SKU: S2600JFF).
 Bridge Slot to extend board I/O:
- SCU0 (Four SAS 3Gb/s ports) to backplane.
- Front control panel signals.
- One SATA (Port 0) 6Gb/s port for DOM.
 Spare Bridge Slot to extend board I/O:
- Mini SAS port (Four SAS 6Gb/s ports) to backplane.
- Front control panel signals.
 One Type-A USB 2.0 connector (USB port 2).
 One 2x7 pin header for system FAN module.
 One DH-10 serial Port A connector.
 One SATA 6 Gb/s (Port 1).
 One 2x4 pin header for Intel
 One 1x4 pin header for Storage Upgrade Key.
The following I/O modules utilize a single proprietary on-board connector. An installed I/O
module can be supported in addition to standard on-board features and any add-in expansion
cards:
 Quad Port Intel ®
I350 GbE I/O Module
 Dual Port Intel ®
X540 10GbE I/O Module
 Dual Port Intel
®
82599 10GbE I/O Module
 QDR InfiniBand* ConnectX I/O Module
 FDR InfiniBand* ConnectX I/O Module
 Three sets of dual rotor managed system fans.
 One internal power supply fan for each installed power supply unit.
Three PCIe Gen III x16 riser slots:
 Riser slot 1 support PCIe Gen III x16 Riser with LP PCIe add-in card.
 Riser slot 2 supports PCIe Gen III x8 Riser (for Intel
customized PCIe x8 riser for Non-Transparent Bridge (NTB) feature
 Riser slot 3 cannot be used with bridge board covered.
 One Bridge Slot for board I/O expansion.
 Integrated 2D Video Controller
 128 MB DDR3 Memory
 Two single port SATA connectors (on baseboard and bridge board) capable of supporting up to
6 GB/sec.
 SCU0 4-port up to 3 GB/sec SAS/SATA through bridge board.
 Intel ®
RAID C600 Upgrade Key support providing optional expanded SATA/SAS RAID
capabilities.
Description
®
RMM4 Lite.
®
rIOM and RMM4 NIC port). Or
®
Intel Server System H2000JF Family Service Guide