IntesisBox IBOX-BAC-DALI User Manual page 12

®
IntesisBox BACnet/IP Server – DALI
Choose "Start->Run..." and enter:
cmd.exe
This will open up a Windows console shell, with which you can add the route to the
IntesisBox with following command line:
route add 192.168.100.254 %COMPUTERNAME%
In Windows Vista and Windows 7 you will need to run that command from a console shell
with administration privileges. Also in these systems, you may have trouble using
environment variable %COMPUTERNAME%. If this is your case, try issuing the same command
changing %COMPUTERNAME% for the IP of your PC (you can get the IP from your computer
with shell command ipconfig).
Finally, ping 192.168.100.254 from the command shell so to check that your PC can see
IntesisBox in the network:
C:\>ping 192.168.100.254
Pinging 192.168.100.254 with 32 bytes of data:
Reply from 192.168.100.254: bytes=32 time<1ms TTL=255
Reply from 192.168.100.254: bytes=32 time<1ms TTL=255
Reply from 192.168.100.254: bytes=32 time<1ms TTL=255
Reply from 192.168.100.254: bytes=32 time=1ms TTL=255
Ping statistics for 192.168.100.254:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
2
File: IBOX-BAC-DALI User Manual eng r1.pdf
© Intesis Software S.L. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SL
User's Manual eng r0
URL http://www.intesis.com
email info@intesis.com
tel +34 938047134
12 / 26