Table of Contents
Advertisement
en – Original instructions
1. Series
2. Motor frame dimension
3. Shaft extension
4. Power supply
5. Shaft power•10 [kW]
6. Motor frame arrangement SVE: Flange with tapped holes and shaft w/o keyseat
7. Reference market
8. Voltage
3.2.2 Pump
e-HME/VME data plate
Figure 4: e-HME/VME data plate
1. Head range
2. Flow range
3. Pump/electric pump unit type definition code
4. Protection class
5. Frequency
6. Serial number (date+progressive number)
7. Electric pump unit/pump part number
8. Maximum operating liquid temperature (uses as EN
60335-2-41)
12
ESM
90R: Oversized Flange
80: Standard Flange
□□: Standard shaft extension
S8: Custom Shaft extension
1: single phase power supply
3: three phase power supply
03: 0.37kW (0.50HP)
05: 0.55 kW (0.75 HP)
07: 0.75 kW (1.00 HP)
11: 1.10 kW (1.50 HP)
15: 1.50 kW (2.00 HP)
22: 2.20 kW (3.00 HP)
B14: Flange with tapped holes
B5: Flange with free holes
HMHA:Suitable for 1-5 e-HME monolithic pumps
HMHB: Suitable for 1-5 e-HME pumps w/sleeve
HMVB:Suitable for 1-5 VM pumps
HMHC:Suitable for 10-22 e-HME pumps
HMVC:Suitable for 10-22 VM pumps
LNEE: Suitable for In-Line pumps
56J: Compliant to NEMA 56 Jet standard
56C: Compliant to NEMA 56C standard
□□: Standard
EU:EMEA
US: North America
208-240 : 208-240VAC 50/60Hz
380-460 : 380-460VAC 50/60Hz
230/400: 208-240/380-460VAC 50/60Hz
9. Maximum operating ambient temperature
10. Minimum head (EN 60335-2-41)
11. Maximum operating pressure
12. Electric pump unit weight
13. Electric pump unit absorbed power
14. Electrical data
15. Maximum operating liquid temperature (uses other
than as EN 60335-2-41)
Hide quick links:
Advertisement
Table of Contents
