Manual Transmitter Search - VDO Cyclecomputing C1DS Instruction Manual

Should your computer not function properly after installing the battery or you want to reset it to
default values, push the AC-button on the rear of the housing.
3.1 Manual Transmitter Search – DIGI CONNECT RESET
After a battery change, a new coding is automatically generated in the transmitter. The
C1DS
C2DS
computer must learn this new coding. Therefore, you have to activate the manual transmitter
C3DS
search DIGI CONNECT RESET:
C4DS
a c call SETTINGS and accept
a c call DIGI CONNECT and accept
?RESET? appears in display
c
accepts
Now, an additional check back secures that you really want to reset the digital coding of your
computer (?RESET? flashes), c accepts.
If you start riding or turn the front wheel now, the computer automatically learns the
transmitters new coding. This procedure may take a few seconds.
GB
73