Ricoh Pro C7200x Operating Instructions Manual page 47

Function
Specifies whether or not to stop printing, if registration in sub scan direction (along feed direction)
exceeds the adjustable range (+/- 3mm).
When to use
Set to Off, if jam J080 occurs frequently.
If set to Off, printing will continue with the registration in feed direction corrected up to 3mm, but no
more than 3mm.
Related Troubleshooting
• J080
For detailed procedure, see the Troubleshooting manual.
Skew detection
1331 [Jam Detection]
1331 [Jam Detection]
1331 [Jam Detection]
Function
Specifies whether or not to automatically detect paper skew.
When to use
Deactivate this setting, if J098 occurs frequently. However, do so only after confirming that
adjusting 1331-06: [Setting] does not resolve the jam.
Related Troubleshooting
• J097
• J098
• Wrong Detection of Skew
For detailed procedure, see the Troubleshooting manual.
Double feed detection
1331 [Jam Detection]
Function
Sets double-feed detection to On or Off.
When to use
Set to Off, if double-feed is falsely detected frequently. Note that double-feeds will not be
detected, if set to OFF.
02: [JAM097/098 Detect Threshold]
04: [JAM097]
05: [JAM098]
03: [Detect JAM099]
Paper Feed/Delivery from Mainframe Trays
45