Ricoh Pro C7200x Operating Instructions Manual page 33

When to use
If poor transfer occurs when using textured paper or plain paper whose surface is not smooth, the
problem may be solved by setting this to [On] and adjusting the bias control.
Related Troubleshooting
• Uneven Density (Textured Paper)
• Mottling
For detailed procedure, see the Troubleshooting manual.
Paper transfer separate voltage
1221 [Paper Transfer Separate Voltage]
Function
Adjust the paper transfer separate voltage.
When to use
If "Black" or "Metallic/Pearl" is selected as the paper type in [Advanced Settings] for the custom
paper, the paper transfer separation voltage is automatically to set to zero. Accordingly, this
setting does not need to be adjusted if the paper type setting is specified properly.
It is also necessary to adjust this setting if 1218: [Paper Transfer Output: Textured Paper Mode] is
toggled On to solve mottling.
Related Troubleshooting
• None
Paper transfer gap
1222 [Paper Transfer Nip Operation Mode]
1223 [Paper Transfer Nip]
Function
Adjusts the gap between the PTR and ITB and the timing when to contact/separate the PTR and ITB.
Default setting of 1222: [Paper Transfer Nip Operation Mode] by type/thickness:
1. OFF: Thick 1 - 2, envelope, transparency, plastic folder, magnet sheet
2. Small gap: Thick 3 - 5 (excluding envelope, transparency), Thick 6 - 8 (including coated,
metallic/pearl)
3. Large gap: (Not used)
4. Small/Large gap: Thick 6 - 8 (excluding coated, metallic/pearl)
When to use
Image is affected/abnormal at the trailing edge
Image Quality
31