Decurler Unit; Mainframe Trays - Ricoh Pro C7200x Operating Instructions Manual

3. Details of Advanced Settings
Function
• 1311-01: Sets the fans in the 3-tray LCIT On or OFF.
• 1311-02: Adjusts the amount of air blown from the fans, if 1311-01 is set to On.
• 1312: Sets pickup assist On or Off.
When to use
Effective for jams, double-feeds and non-feeds.
Pickup assist is effective for non-feeds that occur with thick media that have low friction. Note that
double-feeds may occur with coated stocks, if the effect of the pickup assist is too strong.
Related Troubleshooting
• Frequent Paper Misfeeds
• Double Feeding
• Paper Misfeeding
For detailed procedure, see the Troubleshooting manual.

Decurler Unit

Decurler feed speed
1321: [Correct Paper Curl]
Function
Adjusts the line speed of the decurler unit.
When to use
If the line speed of the decurler unit is set too fast, stains could appear on the edge of the sheets,
which become noticeable when the prints are stacked. If set too low, creases, wrinkles streaks and
stains can appear especially with thin paper. Set an optimum speed.
Related Troubleshooting
• Stained Paper Edges (3)
• Decurling Results in Scratches, Streaks, or Creases
For detailed procedure, see the Troubleshooting manual.

Mainframe Trays

J080 detection
1331 [Jam Detection]
44
01: [Detect JAM080]