Table of Contents
Advertisement
Backrest Angle Adjustment Lever
Pull the backrest angle adjustment lever up to release the seat
backrest lock. Adjust the angle of the backrest and release the
lever to lock the backrest to the desired angle.
Fig 17. Backrest Angle Adjustment Lever
Fore and Aft Adjustment Lever
Pull the fore and aft adjustment lever outward from the seat
to release the seat lock. Slide the seat forward or backward to
a comfortable location and release the lever to lock the seat in
the desired position.
Fig 18. Fore and Aft Adjustment Lever
Operation Manual
Seat Belt
Always check the condition of the seat belt
and mounting hardware before operating the
forklift. If the seat belt or mounting hardware
is defective, it may not properly restrain
the operator, which could result in death or
serious injury.
•
DO NOT operate the forklift until the seat belt or
mounting hardware is replaced, if worn or damaged.
•
The seat belt MUST be worn while operating the forklift.
Failure to wear the seat belt could result in death or
serious injury.
The reach forklift is equipped with a standard two inch (2")
wide retractable seat belt. A three inch (3") wide retractable
seat belt is available where required by state and local laws
and regulations.
Fig 19. Retractable Seat Belt
DO NOT adjust the seat or seat belt while the
forklift is moving. Keep both hands on the
wheel while the forklift is moving to prevent
loss of forklift control which could result in
death or serious injury.
Before starting the engine, adjust the seat for position and
comfort (refer to the Operator Seat section of this manual) and
then adjust the seat belt as follows:
32
Operator Cab
Warning
Warning
Hide quick links:
Advertisement
Table of Contents
