Xtreme Manufacturing XR5919 Operation And Safety Manual page 36

Reach forklift
Table of Contents

Advertisement

E. ENGINE SHUTDOWN
The Engine Shutdown Indicator will be displayed when there
is a serious engine fault and the engine should be shut down.
Automatic shut down is imminent.
NOTE: Refer to the Operation section on Warning Indicators
and Fault Codes and the Engine Indicator Chart (Fig. 67).
E
E
Fig 29. Engine Shutdown Indicator
F. ENGINE WARNING
The Engine Warning Indicator will be displayed when there is
an engine fault. Refer to the Operation section on Warning
Indicators and Fault Codes and the Engine Indicator Chart
(Fig. 67).
F
F
Fig 30. Engine Warning Indicator
G. ENGINE SERVICE REQUIRED
The Engine Service Required Indicator will be displayed when
a maintenance interval has been exceeded.
H. WAIT TO START
The Wait to Start Indicator is displayed when the key switch is
moved to the RUN position. Wait until the indicator goes out
before starting the engine.
I. PARKING BRAKE
The Parking Brake Indicator will be displayed when the
parking brake is applied.
Operation Manual
J. TRANSMISSION DIRECTION
The transmission direction indicator displays whether the
transmission is in FORWARD, NEUTRAL or REVERSE.
K. TACHOMETER
The Tachometer indicates engine RPM.
L. OIL PRESSURE
The Oil Pressure Indicator will be displayed when the engine oil
pressure is below normal. If the Oil Pressure Indicator comes
on during normal operation, stop the forklift, follow proper
shut down procedures, tag forklift with "Do Not Operate" tags,
and have a qualified mechanic service or repair the forklift
BEFORE placing it into service again.
M. VOLTAGE GAUGE
The Voltage Gauge indicates the amount of charge (in Volts).
Normal system voltage is between 12.5 and 14 Volts. If the
voltage gauge shows abnormal readings, stop the forklift,
follow proper shut down procedures, tag forklift with "Do Not
Operate" tags, and have a qualified mechanic service or repair
the forklift BEFORE placing it into service again.
N. HOURMETER
The Hourmeter indicates and records engine operating
hours. Use the hourmeter to establish a forklift maintenance
schedule.
O. TIME / MESSAGE DISPLAY
Displays warnings or status / information messages. In Fig 27,
(Style A) it displays a required maintenance information. If
there is no warning, it displays the clock (Fig. 28).
P. WATER IN FUEL
The Water in Fuel Indicator will be displayed when water is
detected in the fuel filter. Drain the water by opening the
petcock on the bottom of the fuel filter.
In reference to the display Style B, if there is no alert, the top
row indicators disappear.
Fig 31. Main Screen - No Alerts (Display Style B)
36
Operator Cab

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents