Table of Contents
Advertisement
Operator Cab
Multifunction Joystick Controller (Joystick)
Enable LED
Enable Trigger
Fig 49. Multifunction Joystick Controller (Joystick)
The joystick is used to raise, lower, extend, retract the boom,
tilt the carriage (or attachment).
NOTE: The joystick is a variable speed control. Function
speed is proportional to handle movement. The more the
joystick is moved in the appropriate direction, the faster the
corresponding function will occur.
NOTE:
Increasing engine speed can increase boom lift,
extend, and carriage tilt speeds.
NOTE: Two (2) boom functions can be performed at the
same time by moving the joystick into the corner between (2)
individual functions (Positions B, D, F or H, Fig. 51).
Aux Button 1
Aux Button 2
Tilt Thumbstick
Boom Control Handle Functions
Function
Aux Button 1
Aux Button 2
Enable Trigger
Tilt Thumbstick
Enable LED
Fig 50. Boom Control Handle Functions
Fig 51. Joystick Functions
41
Purpose
Control auxiliary direction 1
Control auxiliary direction 2
Trigger must be enabled for other
functions of the control handle to
operate
Control carriage tilt (up/down)
Lit when Enable Trigger is activated
Operation Manual
Hide quick links:
Advertisement
Table of Contents
