JVC GY-HC900CHU Instructions Manual page 39

D Operation Guide
Displays a guide for the current operation
buttons.
E Audio Level Meter
Displays the audio levels for CH-1 to CH-4.
0
.
F Position Bar
Displays the current position in the video.
During trimming, the position bar appears in
green, and icons for the in and out points are
displayed.
6 : Current position of the video
: Position to start trimming
7
(In point)
: Position to end trimming
8
(Out point)
G Information Display
Use the [USER4] button to switch between
camera information display, GPS display and
turning off the display.
The GPS display displays information on the
0
recording location of the video being played
back only when GPS information has been
recorded.
Camera information display displays only
0
information of Gain, Iris, Shutter and White
Balance that have been recorded.
Display Off
USER4
+139.652172
GPS Display
.
Memo :
Trimming information is displayed while
0
trimming is in progress. In this case, pressing the
[USER4] button does not switch the display.
The information display area is not subject to the
0
display settings of the items in [LCD/VF] B
[Display On/Off].
0
dB
F1.6
1/ 100
5600K
USER4
Camera Information Display
USER4
+35.483197
H Date/Time Display
Displays the date/time that is recorded on the
currently played SD card.
Memo :
The date/time display style can be specified in
0
[System] B [Date Style]/[Time Style].
I Network Connection Icon
USB connection or built-in wireless LAN
0
connection u v
Set [Network] B [Connection Setup] B
0
[USB/Int. WLAN] to "On". u v
In the case of connecting to an external
0
network, check the destination in
[Network] B [Connection Setup] B
[Default Gateway].
Icon
Wireless LAN connection from the
host terminal (USB) is established
.
Wired LAN connection from the
host terminal (USB) is established
.
Cellular adapter connection from
the host terminal (USB) is
established
.
When a USB adapter different
from the connection settings is
detected
.
Built-in wireless LAN connection is
established
u v
.
When [USB/Int. WLAN] is set
0
to "Off"
(No
u v
display)
When an unusable USB
0
adapter is detected
Memo :
The icon appears blinking when the camera
0
recorder is starting up, and is displayed in yellow
while getting ready to connect.
LAN terminal connection
0
In the case of connecting to an external network,
check the destination in [Network] B
[Connection Setup] B [Default Gateway].
Icon
LAN terminal connection is
established
.
(No When the LAN cable is not
display) connected
Memo :
The icon appears blinking when the camera
0
recorder is starting up, and is displayed in yellow
while getting ready to connect.
Display Screen in Media Mode
Status
Status
39