Troubleshooting
Symptom
Power does not turn on.
Unable to start recording.
Camera image is not output on
the LCD monitor and
viewfinder screen.
Playback does not start after
selecting a clip thumbnail and
pressing the [STATUS/SET]
button (R).
Images on the LCD monitor
and viewfinder screen appear
dark or blurred.
The [CH-1/CH-2] recording
level adjustment knob does
not work.
[CH-3/CH-4] audio is not
recorded.
SD card cannot be initialized
(formatted).
Battery alarm appears even
after loading a charged
battery.
The time code and user's bit
are not displayed.
Is the AC adapter properly connected?
0
Is the battery charged?
0
Is the power turned on immediately after it is turned off?
0
Make sure to wait for an interval of at least 5 seconds before turning
on the power again.
Is the write-protect switch of the SD card turned on?
0
Make sure that the write-protect switch is turned off.
Is the camera recorder set to the Camera mode?
0
Use the [CAM/MEDIA] selection button to switch to the Camera mode.
Is the SD card inserted compatible with the recording format?
0
Is the camera recorder set to the Camera mode?
0
Use the [CAM/MEDIA] selection button to switch to the Camera mode.
Is the selected clip a playable clip?
0
Playback is not possible if the clip has a different video format setting.
Readjust the brightness of the LCD monitor and viewfinder.
0
Is the [ND FILTER] switch set to "1/64"?
0
Is the iris closed?
0
Is the shutter speed setting too high?
0
Is the peaking level too low?
0
For the LCD monitor, adjust the outline with [LCD/VF] B [LCD
Peaking].
For the viewfinder, adjust the outline with the [PEAKING] knob on the
viewfinder. u v
Is the [AUDIO SELECT CH1/2]-[MANUAL/AUTO] selection switch set
0
to "AUTO"?
Is Full Auto enabled?
0
Is [Camera Function] B [Full Auto] B [Audio] set to "Auto" in Full Auto
mode?
Is the number of recording channels set to "4ch"?
0
Set [System] B [Record Set] B [WAudio]/[YAudio] to "4ch".
Is the write-protect switch of the SD card turned on?
0
Make sure that the write-protect switch is turned off.
Is the battery too old?
0
Even in Camera mode or Media mode, the time code and user's bit
0
may not be displayed depending to the type of display.
Is [LCD/VF] B [Display On/Off] B [TC/UB] set to "Off"? To display the
0
date and time, set it to "On".
Action
Troubleshooting
41