Initial Settings - JVC GY-HC900CHU Instructions Manual

Initial Settings

When the power is first turned on, the Initial Setting
screen for performing the initial settings in the
camera recorder appears.
Set the date/time of the built-in clock in the [Date/
Time] screen.
All operations are disabled until initial settings are
complete.
Memo :
It is recommended to use the AC adapter as the
0
power supply.
Attach the lens cap.
0
1 Set the [POWER ON/OFF] switch to "ON".
A language selection screen appears.
For U models
0
.
For E models
0
.
Memo :
The menus and messages on the screen of the
0
LCD monitor or viewfinder are displayed in the
selected language.
20
Initial Settings
2 Select a language using the cross-shaped
button (JK), and press the [STATUS/SET]
button (R).
A self-diagnosis screen appears.
.
3 Ensure the lens cap is attached, and press
the [STATUS/SET] button (R).
Self-diagnosis starts.
0
A progress bar appears, and "Complete
0
Diagnosis" appears when the diagnosis is
complete.
.
Memo :
It takes about 6 minutes to complete the
0
diagnosis. During the diagnosis, do not operate
or turn off the camera recorder.