Status Screen - JVC GY-HC900CHU Instructions Manual

J Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data recorded in
the SD card being played back.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
*
.
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
Example of user's bit display:
0
F F EE DD 20
.
Memo :
Use the [TC DISPLAY] switch to toggle between
0
the time code display and user's bit display.
K Media Status
PLAY : Playing
STILL : Still picture playback mode
FWD * : High-speed playback in the
forward direction (* playback
speed: 5x, 15x, 60x, or 360x)
REV * : High-speed playback in the
reverse direction (* reverse
playback speed: 5x, 15x, 60x, or
360x)
STOP : Stop mode
P.OFF : Power OFF
L Check Mark
Displayed when the currently played clip is
selected.
M OK Mark
Displayed when OK mark has been appended.
N Clip Information
Displays current clip number/total number of
clips.
O Media
Displays the media slot (W or Y) of the
0
currently played clip.
z appears when the write-protect switch of
0
the SD card is set.
40
Display Screen in Media Mode

Status Screen

This screen allows you to check the current
0
settings.
To display the status screen, press the
0
[STATUS/SET] button in the normal screen.
Press the [STATUS/SET] button to switch to the
0
status screen.
Press the [MENU/THUMB] button at each status
0
screen (other than the [Camera Information] and
[Power] screen) to enter the setting screen.
Use the cross-shaped button (HI) to switch
0
between the screens.
USER Switch Set
Camera
LCD/VF
Record Format
Audio Input
Audio Output
Video
Power
Planning Metadata
Network
LAN
USB/Int. WLAN u v
USB w x
Streaming
.