JVC GY-HC900CHU Instructions Manual page 37

Hd memory card camera recorder
Hide thumbs Also See for GY-HC900CHU:
Table of Contents

Advertisement

V Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data.
Example of time code display:
0
Display Screen
0 0 : 0 0 : 0 0 : 0 0
*
.
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
Enlarged Display
[NDF] is displayed to the right of [TC] in the
case of non-drop frames and [DF] in the case
of drop frames.
00
00
NDF
R-RUN
H
.
Example of user's bit display:
0
Display Screen
F F EE DD 20
.
Memo :
Use the [TC DISPLAY] switch to toggle between
0
the time code display and user's bit display.
W Time Code Lock Indicator
When the built-in time code generator is
synchronized to the external time code data
input during the synchronization of time code
with another camera recorder, Z lights up.
When in the enlarged display mode, [EXTZ] is
shown in the TC mode display.
00
00
M
S
F
X SDI/HDMI Record Trigger
STBY B : When [SDI Rec Trigger] is set to
"Type-A" or "Type-B", or [HDMI Rec
Trigger] is set to "On" and recording
is stopped
REC B : When [SDI Rec Trigger] is set to
"Type-A" or "Type-B", or [HDMI Rec
Trigger] is set to "On" and recording
is in progress
Y GPS Mark u v
When [System] B [GPS] is set to "On", the
signal reception status is displayed.
Memo :
The display changes according to the signal
0
reception sensitivity. If signals cannot be
received, the H mark appears in yellow
regardless of the [LCD/VF] B [Display On/Off]
B [GPS] setting.
This item is not displayed when [GPS] is set to
0
"Off".
Z Media Status
----
: A card is not detected in the
selected slot, and [Tally
System] is also not set to
"Studio"
STBY
: Recording standby
: Recording
RREC
REVIEW
: Clip Review
STOP
: Unable to record to the card in
the slot
P.OFF
: Power OFF
CALL
: Receiving call signals from an
external device, such as a
remote control unit
PGM
: Receiving program signals
from an external device, such
as a remote control unit
PVW
: Receiving preview signals
from an external device, such
as a remote control unit
Display Screen in Camera Mode
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gy-hc900stuGy-hc900cheGy-hc900rche

Table of Contents