Table of Contents
Advertisement
For your Safety
When switching on and while working with the power tool, hold onto it tightly
at both handles and place your body and arms in a position in which they can
absorb the kickback forces or reaction torque on starting up. Always put the
machine down firmly on both rollers.
The person using the tool can control the kickback and reaction forces by taking
suitable precautions.
Never place your hand near rotating insert tools.
The insert tool can move across your hand during kickback.
Keep your body clear of the area in which the power tool would move in the
event of kickback.
The kickback drives the power tool in the opposite direction to the movement of the
grinding disc at the blocking point.
Take particular care when working in the area of corners, sharp edges, etc.
Prevent insert tools from rebounding from or jamming in the workpiece.
The rotating insert tool tends to get stuck in corners, sharp edges or if it rebounds.
This causes loss of control or kickback.
Service / Maintenance / Repair
Have the power tool checked if it has been dropped or become wet.
A possibly damaged power tool is dangerous and no longer safe to operate. Before
using the power tool again, have it checked by our customer service or an author-
ised service centre of Maschinenfabrik OTTO BAIER GmbH.
Repair and maintenance work may only be carried out by an authorised ser-
vice centre of Maschinenfabrik OTTO BAIER GmbH.
Otherwise, all liability and warranty claims against Maschinenfabrik OTTO BAIER
GmbH expire.
Ensure that original BAIER spare parts and original BAIER accessories only
are used when needed.
Original parts are available from authorised dealers. Use of non original parts can
cause damage to the machine and an increased risk of accidents.
Regular servicing by Maschinenfabrik OTTO BAIER GmbH or a servicing and
repair company authorised by us is specified.
Many accidents are caused by poorly serviced and maintained power tools.
11
Advertisement
Table of Contents
