Service; Machine-Specific Safety Instructions; Operating Personnel Requirements; Workplace Safety - Baier BDS 125 N Instruction Manual

Wet concrete cutter / chaser
Table of Contents

Advertisement

For your Safety
d)
Store power tools out of the reach of children when not in use. Do not allow
people to use the tool unless they are familiar with it, or if they have not read
this instruction manual.
Power tools are dangerous if they are used by inexperienced people.
e)
Maintain power tools with care. Check whether moving parts are in proper
working order and do not jam, whether parts are broken or damaged in such a
way that they impair the function of the power tool. Have damaged parts re-
paired before using the tool.
Many accidents are caused by poorly serviced and maintained power tools.
f)
Keep cutting tools sharp and clean at all times.
Carefully maintained cutting tools with sharp cutting edges jam less easily and are
easier to control.
g)
Use the power tool, accessories, insert tools/bits, etc. in accordance with this
instruction manual. Take into consideration the working conditions and the
work to be carried out.
Use of power tools for any purpose other than the intended uses can lead to dan-
gerous situations.

5) Service

a)
Have your power tool repaired only by qualified personnel and only using orig-
inal spare parts.
This will ensure that the safety of the power tool is maintained.

Machine-Specific Safety Instructions

Operating personnel requirements

People below the age of 18 may not use the machine.

Workplace safety

Secure the work area behind holes (in walls, etc.) you are cutting too.
Unsecured work areas can put you and other people at risk.
Watch out for open and concealed electricity cables, and water and gas pipes.
Use suitable detectors to find concealed utility pipes and cables, or contact
the local utility company for advice.
Contact with electricity cables can cause fires and an electric shock. Damage to a
gas pipe can cause an explosion. Penetrating a water pipe causes damage to prop-
erty or could cause an electric shock.
Secure the workpiece.
A workpiece securely held in clamping devices or a vice is more safely held than in
the hand.
Avoid dust accumulation in the workplace.
Dusts can easily ignite.
6

Advertisement

Table of Contents
loading

Table of Contents