Cleaning; Maintenance; Declaration Of Conformity - Baier BDS 125 N Instruction Manual

Cleaning

Danger!
Risk of fatal injuries due to electric shock.
► Disconnect the mains plug before carrying out any work on the wet concrete cutter /
chaser.
The machine must be cleaned after each cutting work session.
• Carefully clean the machine and blow out with compressed air.
• Ensure handles are dry and free of grease.

Maintenance

Danger!
Risk of fatal injuries due to electric shock.
► Disconnect the mains plug before carrying out any work on the wet concrete cutter /
chaser.
The wet concrete cutter / chaser must be serviced at least once a year. Further, servic-
ing will be necessary depending on the wear of the carbon brushes.
Only servicing and repair firms authorised by Maschinenfabrik OTTO BAIER GmbH
may carry out maintenance of the machine. Also ensure that original BAIER spare
parts and original BAIER accessories only are used.

Declaration of Conformity

We herewith declare, with sole responsibility, that this product conforms with the follow-
ing standards or normative documents:
20
EN 60745
in accordance with the provisions of the Directives
2006/42/EC
7 July 2011
Maschinenfabrik OTTO BAIER GmbH,
Heckenwiesen 26,
D-71679 Asperg