Serial Plate Location; Refrigeration Unit Access - Hussmann SMG8B Installation & Operation Manual

Medium temperature self contained
Table of Contents

Advertisement

I
1-4
nstallatIon

SERIAL PLATE LOCATION

The serial plate is located on the back of the
case on the left-hand side. The serial plate con-
tains information specific to the case as well
as a QR code that allows you to view replace-
ment parts and data sheets on a smart phone.
Back View of Case
Serial Plate
Convenience Outlet
Case Power
Power Cord
Cord
Front View of Case
Refrigeration
Unit Location
Front panel shipped
removed and must be
installed in the field.
P/N 3018126_E

REFRIGERATION UNIT ACCESS

Panels on the front and rear of the case may be
removed by lifting the panel straight upward
to clear lower brackets, and then down to
remove. The panel is installed by reversing the
above procedure. Ensure all panels are installed
to prevent air circulation problems.
The case is shipped with the the front left
panel removed, and the two lower back panels
removed. These panels must be installed during
installation.
Optional
Drain Pan
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
Back View of Case
Refrigeration
Unit Location
Rear panels are shipped
removed and must be
installed in the field.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ssg8b

Table of Contents