Techkon SpectroDrive Manual page 8

Dimensions
95 mm
52:
74:
102: 1250 mm
105: 1280 mm
Two different performance packages
The scan-measurement device SpectroDrive and the MS-Windows software ExPresso
form a complete quality control system for increasing productivity and quality of a
printing press.
There are two different versions available:
SpectroDrive + ExPresso Basic
consists of the spectral measuring de-
vice SpectroDrive and the MS-Windows
software ExPresso Basic with the following
functions:
• ink zone specific density display
• color density for CMYK and spot colors
(spectral density)
• densitometric gray balance
• dot area, dot gain and printing contrast
• slur/doubling value
• target values, references, tolerances,
OK sheet
• face- and reverse printing
• works with any color bar length
• display of single measurements when
used as a hand held device
• supports up to 6 printing units
• measurement data export (e.g. JDF-format)
Page 8
750 mm
970 mm
Manual TECHKON SpectroDrive Chapter 1 - General description
Formats:
52: for printed sheet 00 (B3+, 370 x 520 mm)
74: for printed sheet 0B (B2+, 520 x 740 mm)
102: for printed sheet 3B (B1+, 720 x 1020 mm)
105: for printed sheet 3B+ (B1+, 780 x 1050 mm)
Special formats (up to 2100 mm system length /
1800 mm scan length) on request
SpectroDrive + ExPresso Pro
contains the same functions as the
"Basic" package and additionally:
• Gray balance display (densitometric)
• ink zone specific colorimetric
∆E display, Lab, LCh, ∆Lab, ∆LCh
• "InkCheck" recommendation for
ink key setting
• display and evaluation according
to ISO 12647, Gracol G7™
• statistical analysis and report
generator
• supports up to 16 printing units