Defining And Running A Print Job - Techkon SpectroDrive Manual

3.5 Defining and running a Print job

Before running a print job, certain selections have to be made. Everything related with
a Print job is indicated by the blue screen color.
ExPresso has an "Autosave" function. Every Print job will be saved automatically.This
applies also for Print jobs which are not completed and will be resumed later.
Selecting a Print job
The list contains Print jobs which have been made. A Print job can be resumed by
selecting it. If a new Print job to be made resembles a job which is already in the list,
it can be duplicated.
Mounting a Print job
Certain selections have to be made, before the measurements can be started.
Mount - Print job info
Textual information about the Print job can be edited.
The text entered in "Print job name" will be the title of the data set, which will be
automatically saved by ExPresso. It can be selected from the "Print job - Select" menu.
During measurements it will be shown in the lower left section of the status bar.
Page 21
Manual TECHKON SpectroDrive Chapter 3 - How to use SpectroDrive